Flowserve V901 VariCool Desuperheater - Manual (Page 11)

- 11 -
6.4 Assembly component “Plug”
Fig. 3
• Fixation of the plug (2.2)
• Screw the stem (2.4) into the plug (2.2)
• Drill both plug (2.2) and stem (2.4)
together
• Press the spring pin (2.3) into the
drilled hole
After pressing in the dowel pin, the plug
and stem must be aligned to one another !
• Insert the fuse carrier (2.14) in the plug
(2.2)
• Put the piston sleeve (2,13) onto the
plug (2.2)
• Screw the lock nut (2.25) onto the plug
(2.2) (for tightening torques, see page
9)
• The lock nut (2.25) must be secured by
welding spots against automatic
loosening !