Basic adjustments – Flowserve NRR 2-40 User Manual
Page 12
Advertising
12
Node ID
Basic Adjustments
CAN bus
All level and conductivity controllers and associated electrodes are interconnected
by means of a CAN bus using the CANopen protocol. Every item of equipment
features an electronic address (node ID). The four-core bus cable serves as power
supply and data highway for high-speed data exchange.
The CAN address (node ID) can be set between 1 and 123.
The NRR 2-40 is configured at our works and ready for service with other GESTRA
system components without having to set the node ID.
If several systems of the same kind are to communicate in one CAN bus
network, be sure to assign one node ID for each individual system component.
Refer to pages 28 and 29 for more details.
Advertising