Flowserve BK 45 - Manual (Page 12)



Combination spanner A. F. 6 mm, DIN , Form B

Combination spanner A. F.  mm, DIN , Form B

Combination spanner A. F. 0 mm, DIN , Form B

Torque spanner (US: torque wrench) 0-0 Nm, ISO 6789
Tools
Tightening torques
All torques indicated in the table are based at a room temperature of 0 °C.
Item Designation Torque [Nm]
4 Thermovit ® regulator 90
1 Body screws 5
0 Sealing plug 75
. Unscrew sealing plug 0 and strainer 8 .
. Clean strainer, sealing plug and gasket surfaces.
. Discard and replace strainer and sealing plug in case of visible signs of wear or damage (see table
List of Spare Parts).
4. Discard and replace gasket 9 if damaged (see table List of Spare Parts ).
5. Apply heat-resistant lubricant to the thread of the sealing plug (e. g.OKS ® 7).
6. Unscrew sealing plug 0 with gasket 9 and strainer 8 . Screw in Thermovit regulator and tighten
with the torque indicated in the table Torques required for tightening.
Cleaning / replacing strainer
Maintenance
OKS ® 7 is a registered trademark of OKS Schmierstoffe GmbH, München, Germany