Flowserve UBK 46 User Manual
Page 4
4
Important Notes
Safety Note
The equipment must only be installed and commissioned by qualified staff.
Maintenance and service work must only be performed by adequately trained persons who have a
recognised level of competence.
The steam trap is under pressure during operation.
When loosening flanged connections, plugs or the regulator, hot water and/or steam may
escape. This presents the risk of severe scalding.
Installation and maintenance work should only be carried out when the system is
depressurized (0 bar): isolate the trap from both upstream and downstream pressure.
The trap becomes hot during operation.
This presents the danger of severe burns to hands and arms. Installation and
maintenance work should only be carried out when the system is cold (20 °C).
Sharp edges on internal parts present a danger of cuts to hands. Always wear industrial
gloves when replacing the regulator or the strainer.
Danger
Usage for the intended purpose
UBK 46
Use the thermostatic steam trap UBK 46 only for the discharge of condensed water within the rated
pressures and temperatures.
Application in potentially explosive areas - see section “ATEX Directive 94/9/EC, 1999/92/EC” on
page 5.