Fluke Biomedical QA-ES Automation Bundle - Manual (Page 9)

1
Introduction
The QA-ES Automation Bundle is a kit of components
and cables or leads used with the Fluke Biomedical
QA-ES II Electrosurgical Analyzer to automate Electrical
Surgical Units (ESU) tests. The Remote Electrode Control
Monitoring (RECM) test of an ESU is enhanced with this
bundle.
Safety
When you use the bundle of components on an
electrosurgical analyzer test, follow all warnings and
cautions of the QA-ES II Electrosurgical Analyzer as well
as those for the electrosurgical unit under test.
In this manual, a Warning identifies hazardous conditions
and actions that could cause bodily harm or death. A
Caution identifies conditions and actions that could
damage the Analyzer, the equipment under test, or cause
permanent loss of data.
 Warnings
To avoid possible electrical burn or personal
injury, follow these guidelines:
• Read this Users Manual and the QA-ES
Operators Manual before operating the
Analyzer with QA-ES Automation
Bundle.
• Do not exceed the maximum rating of
5 kV peak on the switch box.
• Follow all warnings and cautions in the
QA-ES Operators Manual as well as
those found in this manual.
• Be sure the switch on the switchbox is
off “O” before turning on the QA-ES
Analyzer.
• Examine all accessories for cracks or
damage before use. Do not use and
replace any damaged parts.