Q-See QSD6204 - Manual (Page 31)

·PASSWORD
CONTROL
9. Network Setup
NETWORK
SETUP
Note: The default MAC address is: “00-11-22-33-44-55”, but after
“00” the address will be set by the system!.
Use the UP “▲ ”and DOWN “▼ ”buttons to left to right and use the
“SELECT ” button to change the numbers.
.Once you have finished making your changes, press the “MENU”
button.
.Press the “MENU” button again to exit NETWORK SETUP.
.For more details about each network configuration item, see the
following:
-28-