Q-See QSD6204 - Manual (Page 38)

PLAYBACK
CONTROL
To manually input a specific time to be viewed:
1.
Open the SEARCH TIME window by pressing the “MENU”
button during “PLAY” mode. The arrow will be next to the
most recently recorded event.
The date and time displayed under HARD DRIVE: MASTER
now corresponds with the beginning and ending period of what
has been recorded on your hard drive.
2.
Press the “DOWN” button and the arrow will move below the
date and time references under HARD DRIVE: MASTER.
3.
Move the arrow left or right by using the UP “▲” and
DOWN “▼” buttons. Change the date and time digits by
pressing the SELECT button.
4.
Finally, input the desired starting date an time, press the
“PLAY” button and the DVR will start playing.
-35-