Fluke Biomedical PS320 - Manual (Page 15)

Fetal Simulator
Specifications
7
Uterine Activity
Note
TOCO waveform selection is not available during TREND #1.
Table 2. Uterine Activity
Activity Description
EXECUTE WAVEFORM Start TOCO waveform
UTERINE WAVE OFF Stop TOCO waveform
ANALOG 0 TO +1 VOLT Analog range 0 to +1 V (1 V=100 mmHg)
ANALOG 0 TO -1 VOLT Analog range 0 to -1 V (-1 V=100 mmHg)
UTERINE WAVE 0-25 Range of TOCO waveform
UTERINE WAVE 0-50 Range of TOCO waveform
UTERINE WAVE 0-100 Range of TOCO waveform
SHORT DURATION TOCO waveform of short duration
NORMAL DURATION Normal duration of TOCO waveform
INCREASED DURATION Long duration of TOCO waveform
UTERINE LEVEL =ZERO Zero TOCO channel (automatic on power up)
UTERINE STATIC +20 Increase TOCO static level by 20 mmHg (0-100 mmHg)
INCR. RESTING TONE Resting tone increases
COUPLING 2 close TOCO waves
TRIPLING 3 close TOCO waves
UTERINE PRESSURE SENSIVITY 5 or 40 μV on power up