Fluke Biomedical PS320 - Manual (Page 23)

Fetal Simulator
Simulating Functions
15
Table 4. Simulating Functions (cont.)
Main Menu Sub Menu Function
*MAT SEN. 0.5mV Sets maternal ECG amplitude to 0.5 mV
*MAT SEN. 1 mV Sets maternal ECG amplitude to 1 mV
*MAT SEN. 2 mV Sets maternal ECG amplitude to 2 mV
*MAT RATE +20 Increases maternal rate by 20 bpm
→MATERNAL ECG
*MAT RATE –20 Decreases maternal rate by 20 bpm
*SENS @ 5 μV mmHg Sets pressure sensitivity to 5 μV
*SENS @40
μV mmHg
Sets pressure sensitivity to 40
μV
*UTERINE LVL =0 Sets uterine level to 0 (zero)
*ANALOG TO +1 V Sets analog uterine output from 0 to +1V. 1V=100 mmHg
*ANALOG TO –1V Sets analog uterine output from 0 to –1V. -1V = 100 mmHg
*UTERINE STATIC Sets uterine output in steps of 20 mmHg
*EXECUTE TOCO WA Starts a TOCO wave, not valid during trend selection
*UTERINE WVF OFF Stops TOCO wave, not valid during trend selection
→UTERINE ACTIVITY
*UTERINE WV 0-25 Sets standard TOCO wave from 0 to 25 units