Dell R510 - Manual (Page 50)

Dell
PowerEdge R510 Technical Guide 50
9.3 UEFI and ACPI
For PowerEdge R510 systems, the UEFI layer does not participate in generation of the ACPI (Advanced
Configuration and Power Interface) table. The ACPI table is generated by the BIOS and UEFI exposes the
ACPI table as an EFI configuration table entry. See the UEFI 2.1 specification for the details on EFI
configuration table and the ACPI_TABLE_GUID.
9.4 Supported CPU ACPI States/Turbo Mode
The Intel Xeon processor 5600 series and chipset supports the following C-States: C0, C1, C1E, C3, and C6.
The PowerEdge R510 supports all of the available C-States
R510 supports the available P-States corresponding to the specific Intel 5600 Chipset processors as shown in
Table 18.