Formax FD 6102 - Manual (Page 15)

14
3.3.5 Loading Feeder 3
To load feeder 3:
1. Pull back support B.
2. Place a stack of documents or BREs between the side guides.
Place documents with trailing edge down. Place BREs with leading edge down and the
flap at the support side.
3. Release support B.
3.4 Loading Envelopes
To load the envelopes:
1. Move the side guides B apart as far as
possible with thumb wheel A.
2. Fan the stack of envelopes C and place
them between the side guides (flap down
and trailing - bottom side of envelope
pointing to the system).
3. Move the side guides towards the
envelopes with thumb wheel A.
The space between the side guides and
the envelopes should be such that the
envelopes have just enough play to move
freely.
Note
If the distance between the side guides is too large, the envelopes will skew, when
transported into the system.
B A C