Formax 6206 Series - Manual (Page 54)

LAN Configuration for OLS
1.
Connect your system to your local area network with a Internet Cable (LAN Cable).
2.
From the Settings Menu press
[Supervisor]
, and select
[Communication Settings]
.
3.
Select
[LAN Settings]
.
4.
Make the settings applicable to your situation and press
[OK]
.
You can find detailed information about the OLS settings in the
installation guide that is delivered with this product. In case you do
not have this document, go to the following website:
kb.neopost.com, here you can find product information including
the installation guide.
5.
Select
[LAN Test]
and then select
[Test]
to test the LAN settings.
6.
Return to the Communication Settings Menu and then press Forward
[>>]
.
7
English
49
| Page 49 | okt-05-2012 11:39 |