Formax FD 8850CC - Manual (Page 4)

english english
03/2011 Powerline 450.2 11
Switching the paper shredder on
• Unlock the emergency stop button by
turning it anti-clockwise.
• Turn main switch to position I.
Green LED lights.
Paper shredder is ready for opera-
tion (standby)
Notice Safety switches are installed at the
doors. Paper shredder can only be
switched on if the door and the fl ap are
both closed.
Shreds smooth paper and continuous
paper
Notice The tray can be folded out to hold
stacks of paper or continuous lists.
• Feed paper. See „Tech-
nical data“ for sheet
capacity.
The shredding pro-
cess is star ted by a
pho to –cell in the paper
feeding opening.
When the paper fee-
d opening is free again,
the cut ting sy stem au to ma tical ly swit ches off
af ter app rox. 3 sec. and returns to standby.
Notice
The document shredder can also be
started by pressing the green arrow
button:
• Press briefl y:
Cutting device starts.
Automatic stop approx. 3 seconds af-
ter the last piece of paper was drawn
in, or manual stop when the stop but-
ton is pressed.
• Hold down for longer than 2 sec-
onds:
constant operation without light bar-
rier function.
The cutting device runs until it is
switched off with the stop button.
4 Operation
Only machines with cut size 3.9 x 50 mm:
Shredding crumpled paper
• Pull the drum handle
forward and put the
crumpled paper in the
drum.
• Press the green arrow key.
When you push back the handle the
paper falls into the shredder blades.
Swit ching paper shredder off
• Turn main switch to position 0
Secure main switch with a padlock, if
necessary.
Destroying USB sticks
Insert USB sticks in the centre of the paper
feed.