Formax FD 8850CC - Manual (Page 6)

english english
03/2011 Powerline 450.2 13
Switch off the shredder and pull out the mains
plug. When cleaning only use a soft cloth and
a mild soap-water solution. However, no water
must enter the equipment.
Oil the cutting unit when
cutting performance de-
creases or the device be-
comes noisy, or every time
you empty the waste con-
tainer:
6 Cleaning and maintenance
• Spray special cutting block oil
through paper feed opening across
the whole width of the cutting system
blades.
• Run cutting system forwards and
backwards several times without
feeding paper.
Paper dust and particles are shaken
off.
7 Technical data
EU-Version
US-Version
Cutting type
Cross cut
Shred size
(mm) 3.9 x 50
Nominal cutting ca pa ci ty
, DIN A4 70 g/m 2 60 sheets
Cutting speed
218 mm/s
Lo ading width
443 mm
Power supply
3W + PE 208 V, 60 Hz
Rated power
2.99 HP
Nominal current
20 A
Plug
L15-30P 30 A
Ambient air temperature
25 °C
Dimensions
W x D x H (mm) 750 x 665 x 1590
Weight
220 kg
Volume of shredded material bag
290 l
Noise level
(Idle running/ load) 58 dB(A) / 70-75 dB(A)
Cutting type
Cross cut
Shred size
(mm) 3.9 x 50 2 x 15
Sa fe ty ra ting
DIN 32757 – 1 3 4
Cutting ca pa ci ty
(sheets), DIN A4 70 g/m 2
80 g/m 2
80 - 85
65 - 70
35 - 40
28 - 32
Cutting speed
218 mm/s
Lo ading width
443 mm
Weight
220 kg
Volume of shredded material bag
290 l
Noise level
(Idle running/ load) 58 dB(A) / 70-75 dB(A)
Dimensions
W x D x H (mm) 750 x 665 x 1590 750 x 665 x 1460
Power
for the maximum number of sheets 3 kW 2.2 kW
Power supply
Power supply fuses
(slow-blow)
3 x 400 V, 50 Hz
3 x 16 A
3 x 400 V, 50 Hz
3 x 10 A