Formax V-STACK36 - Manual (Page 3)

1
Specifications
Speed: Variable, depending on source machine
Capacity: Up to 22” of folded documents, approx 1,500 sheets
Dimensions: 16” H x 37.25” W x 14.5” D
Height w/Optional Stand: 41.5 to 45.5” (floor to top of stacker)
30” to 34” (floor to infeed deck)
Weight: 73 lbs (122 lbs with stand)
Power: 110V, 50/60Hz
Made in USA
Unpacking
1. Check the outside of the carton for visible damage. Make note of any damage on the carrier’s receiving report.
2. Open the carton.
3. Carefully remove the carton contents and inspect the unit for paint and structural damage.
4. Carefully check for missing parts. If damage or missing parts are noted, contact your Sales Representative imme-
diately. Save cartons and packing materials. They may be required to substantiate a damage claim or to return a
damaged unit.
Description
The V-Stack36 vertical stacker is designed to work with a variety of Formax pressure sealers and tabletop
folders. Unlike a traditional outfeed conveyor, it stacks forms vertically, providing a neat stack which is easier to
unload for further processing. A height-adjustable stand with locking casters is available to align with a variety
of inputs. The stand is optional for use with tabletop folders and pressure sealers, and required for use with
production pressure sealers.
Infeed deck
Power switch
LED lamp
Run-out switch
Vertical paper stop
Vertical paper stop adjustment knobs
Horizontal paper stop
Horizontal paper stop
sensor lever
Power cord inlet
(not shown)
Interlock cable inlet
(not shown)