Formax V-STACK36 - Manual (Page 7)

#1
INSTALL 4 EACH HEX BOLTS
THRU LOCK WASHERS
THEN THRU BASE ASSEMBLY
(SECURELY TIGHTEN HEX BOLTS)
#2
REMOVE 10 EACH
ALLEN SCREWS FROM
BOTTOM OF STACKER
POSITION RAILS ONTO
BOTTOM OF STACKER
AND REINSTALL SCREWS
(SECURELY TIGHTEN SCREWS)
#3
PLACE STACKER WITH RAILS
ATTACHED ONTO STAND AND
SECURE WITH 4 EACH HEX NUTS
AND FLAT WASHERS
(SECURELY TIGHTEN HEX NUTS)
Assembling V-STACK36-10
5