Formax FD 180 - Manual (Page 6)

2
SETUP
1. Open the top cover and remove wire tie from
folding roller (fi g. 1).
2. Lift up the stapler head lever. Remove the
protective sponge pad under the stapler
head.
3. Open the cassette from the stapler head and
load staples (fi g. 2).
4. Move the stapler heads to the correct posi-
tion to match paper size. Refer to stapler
head position sticker (fi g. 3) on the underside
of the top cover.
5. Close the top cover and plug power cord into
receptacle on back of unit, and into appropri-
ate wall receptacle (fi g. 4).
Fig. 1
Fig. 2
Fig. 3