Chapter 2 installation instructions – Foxconn 915P7AD-8EKRS User Manual

Page 35

Advertising
background image

Chapter 2 Installation Instructions

2 8

Chassis Intruder Connector: INTR

The connector connects to the chassis security switch on the case. The system

can detect the chassis intrusion through the status of this connector. If the

connector has been closed once, the system will send a message. To utilize

this function, set

“Case Open Warning” to “Enabled” in the “PC Health Status”

section of the CMOS Setup. Save and exit, then boot the operating system once

to make sure this function takes effect.

SPDIF Out Connector: SPDIF_OUT

The SPDIF out connector is capable of providing digital audio to external speak-

ers or compressed AC3 data to an external Dolby digital decoder.
Note:The empty pin of SPDIF cable should be aligned to empty pin of S/PDIF

out connector.

SPDIF_OUT

1

SPDIF_OUT

+5 V

GND

E mpt y

INTR

1

2

I NTRUDE RJ

GND

PDF created with pdfFactory Pro trial version

www.pdffactory.com

Advertising
This manual is related to the following products: