Foxconn P4M8907MA-KRS2H User Manual
Page 17
Chapter 2 Installation Instructions
10
Memory
This motherboard includes two 240-pin slots for DDR2. Yo u must in stall at
least one memory module to ensure normal operation. Mixed memory modules
from different manufacturers is not recommended.
Installation of DDR2 Memory
1. There is only one gap near the center of the DIMM slot, and the memory
module can be fixed in one direction only. Unlock a DIMM slot by pressing the
module clips outward.
2. Align the memory module to the DIMM slot, and insert the module vertically
into the DIMM slot.
3. The plastic clips at both sides of the DIMM slot will lock automatically.
128 Pins
112 Pins
Warning :
Be sure to unplug the AC power supply before adding or removing
expan sio n c ard s or oth er system perip herals, esp ecially the
memory d evices, otherwise yo ur mo therb oard or th e system
memory might be seriously damaged.
For the detailed memory support list on this motherboard, please visit the
website:
http://www.foxconnchannel.com
PDF 文件使用 "pdfFactory" 试用版本创建