Foxconn P4M8907MA-KRS2H - Manual (Page 41)

Chapter 3 BIOS Description
34
v AGP Aperture Size
This option defines the size of the aperture if you use an AGP graphics adapter.
The aperture is a portion of the PCI memory address range dedicated for
graphic memory address space.
Note: This function does not work when onboard VGA is used.
v AGP 3.0 Mode
This option is used to set an appropriate mode for the installed AGP card.
v AGP Master 1 WS Write
W hen
“Enabled”, writes to the AGP (Accelerated Graphics Port) are executed
with one wait states. The setting values are: Disabled and Enabled.
v AGP Master 1 WS Read
W hen
“Enabled”, reads to the AGP (Accelerated Graphics Port) are executed
with one wait states. The setting values are: Disabled and Enabled.
AGP & P2P Bridge Control Menu
v VGA Share Memory Size
This option is used to set the onboard VGA share memory size. If you are
running under Windows XP or Windows 2000, set this option to 32M or lower.
The setting values are: Disabled, 16M, 32M, 64M.
v Direct Frame Buffer
This option is used to enable or disable direct frame buffer.
PDF 文件使用 "pdfFactory" 试用版本创建 www.fineprint.com.cn