Foxconn P4M8907MA-KRS2H - Manual (Page 44)

Chapter 3 BIOS Description
37
v OnChip SATA
This option is used to enable or disable onchip SATA. The setting values are:
Disabled and Enabled.
v SATA Mode
This option is used to select SATA mode. The setting values are: IDE and
RAID.
v IDE DMA transfer access
This option is used to enable or disable IDE DMA transfer access. The setting
values are: Disabled and Enabled.
v OnChip IDE Channel 0/1
The integrated peripheral controller contains an IDE interface with support for
two IDE channels. Choose
“Enabled” to activate each channel separately.
The setting values are: Disabled and Enabled.
v IDE Prefetch Mode
This option is used to enable or disable IDE prefetch mode. The setting
values are: Disabled and Enabled.
v Primary/Secondary Master/Salve PIO
These four items let you assign which kind of PIO (Programmed Input/Output)
is used by IDE devices. Choose Auto to let the system auto detect which PIO
mode is best or select a PIO mode from 0-4.
v Primary/Secondary Master/Salve UDMA
UltraDMA technology provides faster access to IDE devices. If you install a
device that supports UltraDMA, change the appropriate item on this list to
Auto. The available setting values are: Disabled and Auto.
v IDE HDD Block Mode
This option is used to set whether the IDE HDD Block Mode is allowed. The
available setting values are: Disabled and Enabled.
VIA OnChip IDE Device Menu
PDF 文件使用 "pdfFactory" 试用版本创建 Æ Æ www.fineprint.com.cn