Denon DVP-602CI - Manual (Page 12)

With HDMI connections, the video and audio signals can be transferred
with a single cable.
Compatible audio
format
Details
Discs
(examples)
2-channel linear PCM
2ch 32-192 kHz
16/20/24 bits CD, DVD-Video,
DVD-Audio
Multi-channel linear
PCM 8ch 32-192 kHz
16/20/24 bits
DVD-Audio
Dolby Digital, DTS Bitstream DVD-Video
DSD
2/5.1ch
2.8224 MHz
1 bit
SACD
Dolby Digital Plus,
Dolby TrueHD,
DTS-HD
Bitstream
HD DVD,
Blu-ray Disc
b The DVP-602CI is supported to the feature of HDMI listed below.
• 30 and 36 bit Deep Color
• x.v.Color z
• Auto Lip Sync Correction
Copyright protection system (HDCP)
In order to play the digital video and audio signals of a DVD- Video or
DVD-Audio disc using HDMI/DVI connections, both the connected
DVD player and monitor must be equipped for a copyright protection
system called “HDCP” (High-bandwidth Digital Content Protection).
HDCP is a copy protection technology consisting of data encoding
and mutual identification of the devices.
The DVP-602CI is HDCP-compatible. For details on the DVD player or
monitor you are using, refer to its operating instructions.
Use a Deep Color compatible cable for connection to Deep Color
compatible devices.
NOTE
• Use a CPPM-compatible DVD player to play DVD-Audio discs that
are copyright-protected by CPPM.
• The audio signals output from the HDMI connector (sampling
frequency, bit rate, etc.) may be restricted by the connected device.
• Video signals are not output properly when using devices that are
not HDCP-compatible.
• Video signals are not output if the input video signals do not match
the monitor’s resolution. In this case, switch the DVD player’s
resolution to a resolution with which the monitor is compatible.
• Use a cable on which the HDMI logo is indicated (a certified HDMI
product) for connection to the HDMI connector. Normal playback
may not be possible when using a cable other than one on which the
HDMI logo is indicated (a non-HDMI-certified product).
• If the monitor or DVD player does not support deep color, deep color
signal transfer is not possible.
• If the monitor or DVD player does not support x.v.Color, x.v.Color
signal transfer is not possible.
• If the monitor does not support “Auto Lip Sync Correction” function,
this function will not work.
Connecting Equipment with HDMI
connectors

Getting Started
Connections
Setup
Playback
Information
Troubleshooting
Specifications
z : “x.v.Color” is trademark of Sony Corporation
065
)%.*
*/
)%.*
Connecting an HDMI-compatible player
065
)%.*
065
)%.*
*/
)%.*
*/
)%.*
n Connecting a TV directly to the DVP-602CI
n Connecting a TV to the DVP-602CI via an AV
amplifier
TV Player
Player AV amplifier
Audio playback is not possible with the DVP-602CI.
There can be no sound output from the HDMI terminal when the
“Resolution” under “Source Select” – “Video Setup” on the DVP-
602CI GUI menu is set to 480p/576p, VGA, SVGA, XGA (vpage 22).
The DVP-602CI does not support the HDMI control (CEC) function.
When using the HDMI control function with a device other than
the DVP-602CI, connect an HDMI control–compatible device to the
MONITOR 1 terminal.
The DVP-602CI can transmit the following sound formats.
TV
DVP602CI_ENG_6th.indd 9 2008/03/26 16:37:15