About the remote control unit, Inserting the batteries, Operating range of the remote control unit – Denon DVP-602CI User Manual

Page 6

Advertising
background image

q

Lift the clasp and remove the

rear lid.

e

Put the rear cover back on.

R03/AAA

30°

30°

Approx. 23 feet / 7 m

w

Load the two batteries properly

as indicated by the marks in
the battery compartment.

About the Remote Control Unit

Inserting the Batteries

NOTE

• Replace the batteries with new ones if the set does not operate

even when the remote control unit is operated close to the unit.

• The supplied batteries are only for verifying operation.
• When inserting the batteries, be sure to do so in the proper direction,

following the “q” and “w” marks in the battery compartment.

• To prevent damage or leakage of battery fluid:

• Do not use a new battery together with an old one.
• Do not use two different types of batteries.
• Do not attempt to charge dry batteries.
• Do not short-circuit, disassemble, heat or dispose of batteries in

flames.

• If the battery fluid should leak, carefully wipe the fluid off the inside

of the battery compartment and insert new batteries.

• Remove the batteries from the remote control unit if it will not be in

use for long periods.

• When replacing the batteries, have the new batteries ready and

insert them as quickly as possible.

Operating Range of the Remote Control

Unit

Point the remote control unit at the remote sensor when operating it.

NOTE

The set may function improperly or the remote control unit may not
operate if the remote control sensor is exposed to direct sunlight,
strong artificial light from an inverter type fluorescent lamp or infrared
light.



Getting Started

Connections

Setup

Playback

Information

Troubleshooting

Specifications

DVP602CI_ENG_6th.indd 3

2008/03/26 16:37:11

Advertising