Application & hardware installation, Gigabit ether channel application, Datacom systems inc – Datacom Systems SS series SPAN User Manual

Page 32

Advertising
background image

Datacom Systems Inc

SPAN and Multi-Link Aggregators/Regenerators • USERguide

32

Unlike other solutions, the VERSAstream

™

Multi-Link Aggregator when deployed with

SINGLEstream

™

Gigabit Aggregation Taps or other Datacom Systems Gigabit Ethernet taps

provides complete visibility into Gigabit EtherChannel, while allowing network professionals
to use their existing analysis and monitoring devices. The VERSAstream

™

Multi-Link

Aggregator is a simple "plug and play" solution that can combine data from multiple Gigabit
Ethernet network segments into one stream of data. A single Gigabit device, such as an intru-
sion detection system, protocol analyzer, or network probe can receive the aggregated data with
just one network interface card (NIC). It requires no software, no configuration, and no admin-
istration.

Application & Hardware Installation —

Figure 23

through Figure 25 depict typical application installations of VERSAstream

™

Multi-

link aggregator/regenerator series models.

Gigabit Ether Channel Application —

shown in Figure 23,

focuses on monitoring and analyzis of a Gigabit Ether Channel Distribution Network.
This VS-1028 is similiar to other VERSAstream

™

Multi-link series installations:

Figure 23 - VS-1028 Gigabit EtherChannel Application

Advertising
This manual is related to the following products: