Fulgor Milano FSH 905 ID TS - Manual (Page 25)

24 25
GB
Activating automatic heating (or
“heat-up” function)
Press and hold an area of the cursor for
the cooking area that is working for about 3
seconds until you hear a beep (such as 1/3
of the length of the cursor area).
For example: Select level 3 and activate the
automatic heating function by pressing your
finger for 3 seconds. The corresponding
display shows the letter “A” alternating with
“3”. With these settings, the cooking surface
heats the cooking area at the maximum
level “9” for 2 minutes and then continues
cooking level at level “3”.
Power
Level
Duration
Automatic
Heating
Function (time
in minutes)
Maximum
Duration
of Working
Time without
Commands
(time in
minutes)
0 -
1 0’ 40” 516
2 1’ 12” 402
3 2’ 318
4 2’ 56” 258
5 4’ 16” 210
6 7’ 12” 138
7 2’ 138
8 3’ 12” 108
9 - 90
P - 10
Extension function
(For large pans)
This function facilitates cooking with large
rectangular pans, is only available for the
rectangular cooking areas and is activated
by simultaneously pressing the 2 cursors of
display of the selected cooking area shows
a “P”. The Booster function can be activated
by pressing at the end of the cursor of the
cooking area (11).
The power increase is different depending
on the size of the cooking area:
1) For a cooking area with a diameter of
145 mm, the power goes from a level 9
of 1400 W to the Booster level of 2200
W for 10 minutes.
2) For a cooking area with a diameter of
180 mm, the power goes from a level 9
of 1850 W to the Booster level of 3000
W for 10 minutes.
3) For a rectangular cooking area
(220x190), the power goes from a level
9 of 2100 W to the Booster level of 3700
W for 10 minutes.
4) For a cooking area with a diameter of
260, the power goes from a level 9 of
2600 W to the Booster level of 3700 W
for 10 minutes For safety reasons, the
Booster function has a limited duration.
If during pot is removed from the cooking
area during the Booster time, the Booster
remains active and the Booster time is not
deactivated.
With the Booster activated, changing the
value set with your finger in the cursor area
deactivates the Booster.
The Booster function “P” can be activated in
all cooking areas, but priority is given to the
last Booster activated, reducing any other
cooking levels.
Automatic preheating
(or “heat-up” function)
This feature makes cooking easier. You do
not need to be permanently present during
cooking: the surface automatically heats
up at Full Power and then returns to the
selected power level after a certain time
(see Table 1).