GAI-Tronics 700 Series 120 V AC Page/Party Systems - Manual

Pub. 42004-139D
GAI-Tronics Corporation P.O. Box 1060, Reading, PA 19607-1060 USA
610-777-1374 „ 800-492-1212 „ Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
700 Series
Page/Party
®
Systems
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics. GAI-
Tronics retains all intellectual property and other rights in or to the information contained herein, and
such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
The GAI-Tronics Page/Party ® System is a modular industrial communication system incorporating from
two to possibly hundreds of stations. Available in several forms, each station includes a handset, two
amplifiers (one for the handset and the other to drive one or more paging speakers), associated controls,
and a paging speaker (usually mounted separately). All stations are wired in parallel and additional
stations may be added at any time.
A GAI-Tronics Page/Party ® System layout should be planned in advance of installation. Select handset
station locations carefully, taking convenience, accessibility, and personal safety into account. The
quantity and location of paging speakers must be carefully considered, particularly in areas of high
ambient noise or reverberation. The speaker amplifier built into each station drives one horn-loaded page
speaker. If additional paging speakers are needed, separate speaker amplifiers can be added to the
system. In quiet areas, such as offices, several paging speakers can be connected to a single station.
Please refer to Pub. 42004-135, Speaker Installation, or consult with a GAI-Tronics sales representative
for additional system planning information.
All units are wired in parallel. Good planning will minimize the cable required for each installation.
GAI-Tronics Corporation can supply multi-conductor cable designed especially for this application. The
number, size and color-coding of conductors are listed in the accompanying system connection diagrams.
Standard cable has 600-volt insulation and is UL-rated for power cable tray use. Additionally, for ease of
installation GAI-Tronics’ cable is color-coded to match the termination points in our enclosures. The
maximum standard cable length is 5250 feet (1600m) from the Line Balance Assembly systems. For non-
standard cable, please contact a GAI-Tronics representative.
The cable described above includes conductors to provide ac operating power to each station. All stations
operate from a common source, enhancing reliability, particularly if no other ac load is placed on the
circuit breaker or branch line feeding the system. This configuration also allows easy transfer to an
emergency power source in the event of power failure. However, if preferred, each station may be
individually powered from a nearby nominal 115 volt, 50 or 60 Hz single phase outlet.