GAI-Tronics 702-002 Single Party 24 V DC Amplifier Enclosure User Manual

Confidentiality notice, General information, Installation

Advertising
background image

Pub. 42004-147H

GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA

610-777-1374

 800-492-1212  Fax: 610-796-5954

V

ISIT WWW

.

GAI

-

TRONICS

.

COM FOR PRODUCT LITERATURE AND MANUALS

G A I - T R O N I C S ® C O R P O R A T I O N

A H U B B E L L C O M P A N Y

Model 702-002, 732-102, and 733-002

24 V DC Single-Party Amplifier Enclosures

Confidentiality Notice

This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics.
GAI-Tronics retains all intellectual property and other rights in or to the information contained herein,
and such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.

General Information

The following GAI-Tronics amplifier enclosures are covered in this manual:

Model Description

702-002

Indoor Amplifier Enclosure; single-party, 24 V dc input

732-102

Weatherproof Aluminum Amplifier Enclosure, single-party, 24 V dc input

733-002

Weatherproof Non-metallic Amplifier Enclosure, single-party, 24 V dc input

The amplifier enclosure is an important component of the 700 Series Page/Party

®

system. The Model

702-002 Indoor Amplifier Enclosure is constructed of fabricated steel. The Model 732-102 Outdoor
Enclosure is made of cast aluminum alloy, and the Model 733-002 Outdoor Enclosure is made of Valox

®

.

Both outdoor enclosures are extremely weatherproof and corrosion-resistant.

These enclosures are equipped with terminal strips for connecting inter-station cable. The 701 and 751
Series amplifiers mate directly with these enclosures.

Installation

CAUTION

Do not install this equipment in hazardous areas or areas other than those

indicated on the approval listing in the “Specifications” section of this manual. Such installation
may cause a safety hazard and consequent injury or property damage.

When installing an add-on station, consult the 24 V dc system layout diagrams at the end of this manual.
These figures, when used in conjunction with the station installation information and cable layout guide,
should provide all the information necessary to install additional Page/Party

 stations.

Advertising