GAI-Tronics 231-001 Pole Mounting Kit - Manual

Pub. 42004-099A
GAI-Tronics Corporation P.O. Box 1060, Reading, PA 19607-1060 USA
610-777-1374 „ 800-492-1212 „ Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Model 231-001 Pole Mounting Kit
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains sensitive
business and technical information that is confidential and proprietary to GAI-Tronics. GAI-Tronics retains
all intellectual property and other rights in or to the information contained herein, and such information may
only be used in connection with the operation of your GAI-Tronics product or system. This manual may not
be disclosed in any form, in whole or in part, directly or indirectly, to any third party.
General Information
This kit is for use with GAI-Tronics weatherproof enclosures measuring 8
× 9.5 inches.
Bracket Mounting Procedure
Mount the bracket 54 inches (recommended height) from the floor to the centerline of the bracket. The
universal bands are capable of securing the bracket to poles between 2.5 and 15 inches in diameter. For
additional support when using wood poles, use 3/8-inch or ½-inch lug bolts with washers (not included).
Installing the Band
With the screw fully retracted, slip the free end of the band through one of the outer slots in the rear of the
bracket. Be sure that the clamp is positioned with the bolt head opposite the outer slot to allow for
clearance. See Figure 1.
Figure 1. Installing the Band