Denon RCD-M33 - Manual (Page 14)

ENGLISH
14
PTY Search
(News)
(Top 40)
(Information)
(Sports)
(Talk)
(Rock)
(Classic Rock)
(Adult Hits)
(Country)
(Oldies)
(Soft)
(Soft Rock)
Program Types
(Nostalgia)
(Personality)
(Jazz)
(Classical)
(R&B)
(Soft R&B)
(Language)
(Religious Music)
(Public)
(College)
(Weather)
(Religious Talk)
NOTE: If no program of the specified type is found, “ NO PROGRAM ” is displayed.
1 Press the RDS button twice.
2
Press the PTY button to select the type of
program.
(One of the 24 types listed below can be
selected.)
4 The station is tuned in.
3
Press the TU+(7 ) or
TU–(6) button. (auto tuning)
TP Search
NOTE: “ NO PROGRAM ” is displayed when there is no traffic information broadcast station.
1 Press the RDS button 3 times.
3 The station is tuned in.
2
Press the TU+(7 ) or
TU–(6) button. (auto tuning)
Reception frequency
Reception frequency
Radio Text
• When the RT mode is turned on while an RDS radio station not offering an RT service is tuned
in, “NO TEXT” is displayed on the display, then the mode automatically switches to the PS
mode.
• In the same way, the mode automatically switches to the PS mode when the RT service is
finished. In this case, the mode automatically switches from the PS mode back to the RT mode
when an RT broadcast is resumed.
• The RT mode cannot be set in the AM band or for FM stations not offering RDS broadcasts.
• To turn the RT mode off, press the TIME/ DISPLAY button and switch to the desired display
mode.
1
To set the RT mode, press the TIME/
DISPLAY button on the remote control unit
until “Radio Text” scrolls on the display.
2
When the station currently tuned in is
offering a radio text message service, the
message scrolls on the display.
Scrolling display