Denon RCD-M33 - Manual (Page 25)

ENGLISH
25
• When the 1/ 3 (play /pause) button or 5 (open/close) button on the CD receiver is pressed
while the power is set to STANDBY mode, the power automatically turns on and the play or
open/close operation is performed.
• When the CD 1/ 3 button on the remote control unit is pressed while the power is set to
STANDBY mode, the power automatically turns on and the play operation is performed.
• In the same way, when the TUNER buttons on the remote control unit is pressed, the power
turns on and the corresponding station is tuned in.
13 AUTO ON FUNCTION
(2) Random playback …………………………………………………………………………………… Random Playback
(Using the remote control unit)
1
2
3
4
1
Press the RANDOM button in the play stop mode.
• Disc mode :
The mode for playing all the files on the disc in random order
is set.
• Folder mode :
The mode for playing all the files in the selected folder in
random order is set.
Random repeat playback is possible using the REPEAT button.
3 Use the FOLDER +/ – buttons to select the folder to be repeated.
4 Press the 1/ 3 (play/pause) button to start playback.
Select the folder or disc mode using the FOLDER MODE button.
2
NOTES:
• The RCD-M33 is compatible with the “MPEG-1 Audio Layer 3” standards (sampling frequency of 32,
44.1 or 48 kHz). It is not compatible with such other standards as “MPEG-2 Audio Layer 3”, “MPEG-
2.5 Audio Layer 3”, MP1, MP2, etc.
• It may not be possible to play some CD-R/RW discs due to disc properties, dirt, warping, etc.
• The sampling frequency is output as 44.1 kHz by the sampling converter.
• In general, the higher an MP3 file’s bit rate, the better the sound quality. On the RCD-M33, we
recommend using MP3 files recorded with bit rates of 128 kbps or greater.
Applicable bit rates: 32 to 320 kbps for MP3 files, 64 to 160 kbps for WMA files.
• MP3/WMA files may not be played in the expected order, since the writing software may change
the position of the folders and the order of the files when writing them on the CD-R/RW.
• Programmed playback are not possible with MP3/WMA discs.
• When writing MP3/WMA files on CD-R/RW discs, select “ISO9660 JOLIET EXTENSION” as the
writing software format. This may not be possible with some types of writing software. For details,
refer to the writing software’s usage instructions.
• With the RCD-M33 it is possible to display folder names and file names on the display up to 32
characters.
• If recorded in a format other than “ISO9660 level 1”, normal display and playback may not be
possible. In addition, folder and file names including other symbols will not be displayed properly.
• Be sure to add the extension “.MP3/WMA” to MP3/WMA files. Files cannot be played if they have
any extension other than “.MP3/WMA” or if they have no extension. (with Macintosh computers,
MP3/WMA files can be played by adding the extension “.MP3/WMA” after the file name consisting
of up to 32 capital or numbers and recording the files on the CD-R/RW.)
• Do not apply stickers, tape, etc., to either the label side or the signal side of CD-R/RW discs. If
adhesive gets on the surface of a disc, the disc may get stuck inside the RCD-M33 and be
impossible to eject.
• The RCD-M33 is not compatible with packet write software.
• The RCD-M33 is only compatible with MP3 ID3-Tag Version 1.x.
• The RCD-M33 is not compatible with play lists.
• The time may not be displayed properly when manual searching is performed during variable bit rate
playback.
• Not compatible with switching of the time display using the TIME/ DISPLAY button.
• For files for which title and artist names are recorded, the title and artist names can be displayed in
the play or pause mode by pressing the TIME/ DISPLAY button on the remote control unit.
• Multi-session discs and CD-R/RW that have not been finalized can also be played back; however,
playback of discs that have had session closure within 10 sessions or have been finalized is
recommended.
• The WMA meta tag function is compatible with title, artist and album names.
• The maximum number of playable files and folders is 512 for the sum of the number of folders and
files, with the maximum number of folders being 256.
• Copyright-protected WMA files cannot be played.
(“Not Support” appears on the displayed. Use the 9 and 8 buttons to select another file.)
3 Use the FOLDER +/ – buttons to select the folder to be repeated.
• : Only the files in the selected folder are played repeatedly.
• : All the files on the disc are played repeatedly. Once playback of the last file is
finished, playback starts over from the first file on the disc.
• : All the files in the selected folder are played repeatedly. Once playback of the
last file in the selected folder is finished, playback starts over from the first
file in the folder.
• To cancel the folder repeat mode, press the REPEAT button repeatedly until the “ ”,
“ ” or “ ” indicator turns off.
4 Press the 1/ 3 (play/pause) button to start playback.