Denon RCD-M33 - Manual (Page 8)

ENGLISH
8
o / 1 / FLD / ALL
This changes as follows each time the
REPEAT button is pressed.
• When the function is set to CD and the
mode is not the folder mode:
1st press :
1 (single-track repeat)
is displayed.
2nd press : ALL (1 disc all track
repeat) is displayed.
3rd press : Nothing is displayed.
• When the function is set to CD and the
folder mode is set (only valid for discs
containing MP3 and/or WMA files):
1st press :
1 (single-track repeat)
is displayed.
2nd press : FLD (all track in a
folder repeat) is displayed.
3rd press : Nothing is displayed.
!0 SLEEP
This lights when the sleep timer is
operating.
!1
The timer will operate when this is lit.
!2 Remote control signal indicator
Flashes when remote control signals are
received.
q w e r t y u o !0 !2 i !1
!4 AUX IN (analog input) jacks
• This is an input terminal.
!5
AUX OUT (analog output) jacks
• This is an output terminal for recording.
!6
FM antenna terminal
(ANTENNA TERMINAL FM)
• Connect the FM antenna here.
!7
Digital output jack
(DIGITAL OPTICAL OUT)
• Digital data is output in optical form from
this jack.
!8 Speaker terminals (SPEAKERS)
• Use these to connect the speakers.
!9 System connectors
(SYSTEM CONNECTOR 1 and 2)
• When connecting the cassette deck,
connect these connectors to system
connectors on other system
components.
(Use the system cords included with the
other components.)
@0
AC OUTLET
• When using in combination with the
cassette deck, connect to the AC outlet
on the CD receiver (RCD-M33) or one of
the other components (100W MAX).
@1 Power cord
• Plug this cord into a wall power outlet.
@2 MONO OUT terminal (SUB WOOFER)
• Connector jack for subwoofer with built-
in amplifier (super woofer), etc.
@3 AM antenna terminal
(ANTENNA TERMINAL AM)
• Connect the AM antenna here.
@4 TAPE OUT (analog output) jacks
• This is an output terminal for recording.
@5 TAPE IN (analog input) jacks
• This is an input terminal.
(2) Rear Panel (3) Display
NOTE:
• The timer standby mark (“
”) does
not light if the current time
and the timer have not been set.
q Segment
The selected functions, volume, reception
band, reception frequency, RDS data, time,
and timer settings are displayed here.
w 1/ 3
1 (the play indicator) lights when a disc is
playing, and 3 (the pause indicator) lights
when pause mode is set.
e SDB
This lights when SDB mode is on.
r TONE
This lights when the TONE is adjusted.
t TUNED
This lights when a station is tuned in
properly.
y AUTO / ST / MONO
These display the FM reception mode.
ST
: This lights when a stereo
program is received in the FM
AUTO mode.
MONO : This lights when a monaural
program is received in the FM
AUTO mode and when the
BAND button is pressed,
setting the FM MONO mode.
AUTO : This lights when the BAND
button is pressed, setting the
FM AUTO mode.
u
TOTAL
Lights when the total remaining time or the
total number of tracks remaining on the
disc is displayed on the segment.
i RANDOM
“RANDOM” lights during random play.