Harken 7413.10 MKIV Jib Reefing & Furling built after Feb. 2009 - Manual (Page 20)

Continue installing connectors and wedges. Make
sure to use adhesive in screw holes.
Continue assembly. Use 356 mm (14")
bottom connector to assemble bottom foil.
Slide halyard swivel onto foil above feeder window.
Make sure taller “half” is up as shown.
20 MKIV units 3, 4
Assembly Bottom Foil/Connectors/Halyard Swivel
Red Loctite ®
adhesive.
Loctite is a registered trademark of Henkel AG &
Company KGaA.