Harken 7413.10 MKIV Jib Reefing & Furling built after Feb. 2009 - Manual (Page 25)

Determine height of link plates to provide anchor
clearance and cut to length.
Cut at scribe mark. Deburr edges.
Assembly Unit 3—Attach Toggle/Long Link Plate
Fasten one long link plate to drum assembly
using fasteners. Use blue Loctite ® adhesive
on screws.
Fasten second long link plate to drum assembly
and secure to toggle using locknuts.
MKIV unit 3 25
WARNING! Stay must attach
to toggle. Do not attach stay
to crosspin at drum assembly
because crosspin and plates
can fatigue and break.
Apply isolator.
Loctite is a registered trademark of Henkel AG &
Company KGaA.