Highgear AltiTech 2 - Manual (Page 8)

TIme funcTIons
14
english
modes of operaTIon
13
english Compass Main Baro Main Alti Main
Alti Log Main Chrono Main Chrono Log Main
Alarm Main
Chronograph
data
Compass Main Baro Main Alti Main
Alti Log Main Chrono Main Chrono Log Main
Alarm Main
altiMeter log
Compass Main Baro Main Alti Main
Alti Log Main Chrono Main Chrono Log Main
Alarm Main
Chronograph
Compass Main Baro Main Alti Main
Alti Log Main Chrono Main Chrono Log Main
Alarm Main alarM
VieW tiMe 1 / tiMe 2
The Summit/Altitech is equipped with a full feature watch package
including Time of Day, Day/Date/Day of Week, Two Time Zones, Space
Zones and Two Daily Alarms.
The Time Zone being displayed is indicated by a small T1/T2 in the upper
left corner of the display.
VieW / Change tiMe zone
press & hold the s2 key.
time zone one time zone two
pick up time 1 from icons page
Main display Modes (continued)
s1
s4
s2
s3
s1
s4
s2
s3
KEY REFERENCE
s5
s1 s4
s2 s3
AXIS
SUMMIT SUMMIT
ALTITECH 2
s1
s4
s2
s3
s1
s4
s2
s3
ALTITECH 2
KEY REFERENCE
setting the tiMe oF day
1. Start in tiMe Mode.
2. Select tiMe 1 or tiMe 2 using the s2 key.
3. press & hold the s4 to enter the setting sequence.
4. Adjust hour, Minutes, seConds, year, Month, date, 12/24 hour mode using the
s1 and s2 keys. The variable you are programming (Hours, Min, Sec, ect. ) will be shown in
the top line of the display.
5. Set and advance from variable to variable using a QuiCK press of the s3 key.
6. Exit setting sequence using the s4 key.
7. Select alternate time and repeat the above procedure.