Highgear Axis XT - Manual (Page 4)

Secondary Modes of Operations: Timer
The watch is equipped with a customizable Countdown Timer (up to 99:59:59).
NOTE: The countdown time cannot be SET in TIMER mode. To set the COUNTDOWN TIME, go to Secondary Modes of
Operations: SET.
- From TIME mode, PRESS MODE
to enter TIMER (TMR) mode.
USING THE TIMER:
- PRESS BARO to START and / or PAUSE the timer.
- If the countdown timer is active,
the word RUN will appear in the display
- If the countdown timer is paused,
the word STP will appear in the display.
NOTE: If the TIMER is PAUSED, the watch will default back to TIME mode after approximately 30 seconds.
- Once the TIMER reaches the set time, an alert will sound for approximately 5 seconds and the
TIMER will reset automatically.
- If the TIMER was PAUSED and you wish to reset manually, PRESS ALTI.
- PRESS MODE to move to the next mode in the Secondary Mode Sequence.
Secondary Modes of Operations: World Time
The watch is equipped with a World Time mode that displays the TIME OF DAY in 48 cities around the world.
- From TIME mode, PRESS MODE to enter WORLD TIME (UTC) mode.
NOTE: Not all countries adjust their times for daylight savings (DST), so if DST is turned ON, some times may vary by
one-hour.
- PRESS ALTI and / or BARO to toggle through 48 cities.
- Toggle to the city location that is closest to your current location (north or south), then
PRESS & HOLD COMPASS to select this location as your home location.
NOTE: All locations will display time relative to your home location. To ensure accurate WORLD TIME information is
displayed, please follow the TIME SETTING instructions (see Secondary Modes of Operations: SET).
- PRESS MODE to move to the next mode in the Secondary Mode Sequence.
Secondary Modes of Operations: Sunrise / Sunset Times
The watch displays the estimated Sunrise / Sunset Times for each World Time Location.
- From TIME mode, PRESS MODE to enter SUN TIMES (SUN) mode.
NOTE: Not all countries adjust their times for daylight savings (DST), so if DST is turned ON, some times may vary.
- PRESS ALTI and / or BARO to toggle through 48 cities.
- PRESS MODE to move to the next mode in the Secondary Mode Sequence.
Secondary Modes of Operations: Settings
All settings and calibrations are performed within the SETTING mode. Please enter all information correctly, as incorrect
information can affect the accuracy of data provided.
- From TIME mode, PRESS MODE to enter SETTINGS (SET) mode.
- PRESS ALTI and / or BARO to toggle through the settings.
The selected setting will flash in the display:
TIME > UNIT > COMPASS > BAROMETER > ALTIMETER > TIMER > ALARM
- PRESS COMP to enter the selected (flashing) value.
T1
T1
Location
Time of Day for Location
(Relative to Current Time)
Current Time
Location
Sunrise Time for Location
Sunset Time for Location
P