Hoefer IEF100 - Manual (Page 25)

• p19
Clear All Protocols
This option is used to overwrite the existing protocols in memory. A
popup screen shows three options:
Defaults
Erase
Cancel
• Highlight the appropriate option and press OK.
• DEFAULTS resets all 30 protocols to the factory default settings, i.e., the
nine pre-programmed protocols and 21 empty protocols.
• ERASE deletes all the data in all 30 protocols in memory. Empty protocols
have default limits of 12,000 V, 500 μA/strip, 2 W/strip and 20 °C.
Serial Number
Displays the serial number of the IEF100. This is not editable.
Note: You cannot recover user
programmed protocols once they
have been reset, or erased.