Honestech VHS to DVD 3.0 Deluxe - Manual (Page 53)

53. VHS to DVD 3.0 Deluxe
Burn Options:
Disc Name – use this option to create a name for your disc (limited to 32 characters including
spaces). The name will be visible when played on a computer or from the display interface on
supported DVD players.
Drive – use this option to select the disc drive that will burn your disc.
Burn Speed – use this option to specify the speed at which your disc drive will burn your disc.
Tip: Slower burn speeds will typically yield better disc results. If you encounter burning
problems, try lowering the burn speed. Speeds can then be raised incrementally with
each successful burn.
Create Video_TS folder – use this option to create a Video_TS folder in the location specified.
A Video_TS folder is the file structure or directory typically burned to DVD discs which also
contains the DVD movie.
Make UDI – use this option to create a universal disk image in the location specified. A
Universal Disk Image is a single data file containing the complete contents and structure of
what would normally be burned to a CD or DVD. The UDI file can be burned to disc at a later
point using a UDI burning program.
Temp Folder – use this option to select the temporary folder used during the burning process.
The Advanced mode uses the temporary folder to convert your video to disc format. Once
burned to disc, the converted video is purged from the temporary folder.
Burn Process:
Burn – click the OK button to begin the burning process, made up of two automated steps
which convert your audio and video to disc format, and burn the converted information to disc.
A finish message will appear when the burning is complete.
*
Warning: Manually ejecting your disc before completion can cause the disc to
malfunction.