Hypertherm HPRXD Short Torch with Integrated Lead Rev.1 - Manual (Page 13)

HPRXD Short Torch Instruction Manual 808890 13
1 – Specifications
HPRXD short torch with integrated lead
The HPRXD short torch with integrated lead:
 Functions the same as the standard HPRXD torch with 2 exceptions.
 The torch does not have the ohmic-sensing feature.
 The torch does not have a quick-disconnect feature.
 Connects to the junction box.
 Includes a 2.5 m (8 foot) flexible lead that is part of the torch.
 The lead has a recommended minimum bend radius of 10.0 cm (3.9 inches). See Figure 2.
Figure 2 – Bend radius
 The lead is not designed for cyclic bends greater than 90° during cutting. See Figure 3.
Figure 3 – Bend angle during cutting
10.0 cm
(3.9 inch)
90°
45°
0°
Greater than 90°