Hypertherm HPRXD Short Torch with Integrated Lead Rev.1 - Manual (Page 19)

HPRXD Short Torch Instruction Manual 808890 19
2 – Installation
Install the junction box
1. Remove the cover from the junction box.
Figure 7
2. Mount the junction box 2.5 m (8 feet) or closer to the cutting location. (See Figure 5 – Junction box dimensions on
page 15 for mounting dimensions.)
 Allow space to install and remove the cover of the box for servicing.
3. Ground the junction box to the bus bar on the cutting table or equivalent. See Recommended grounding and
shielding in the Installation section in your system’s instruction manual for more information.
Figure 8