Hypertherm HPRXD Short Torch with Integrated Lead Rev.1 - Manual (Page 24)

24 HPRXD Short Torch Instruction Manual 808890
2 – Installation
Mount the torch
Use only the mounting area to mount the torch. See Figure 15 for the location of this area. The insulator separates the
mounting bracket and the torch body to prevent arcing. Do not use a mounting bracket that has conductive material past
the insulator. See
Figure 14 for an example of correct and incorrect mounting.
Figure 14
Figure 15
* Consumables are not included with the torch assembly. You must purchase consumables separately.
Depending on your application, Hypertherm offers a torch mounting bracket that fits this torch. See Mounting bracket on
page 29. Use your torch mounting bracket, and follow the manufacturer’s instructions on how to mount the torch in the
mounting bracket.
Bad Good
1
2
3
4
5
6
7
8
1 Spacer
2 Mounting area (gray)
3 Insulator (Do not use this area for mounting.)
4 Spacer screws (4)
5 Consumables*
6 Bracket screws (2)
7 Mounting bracket
8 Torch lead