Hypertherm HPRXD Short Torch with Integrated Lead Rev.1 - Manual (Page 20)

20 HPRXD Short Torch Instruction Manual 808890
2 – Installation
Connect the leads
 Do not overtighten the connections.
Junction box to the ignition console
1. Connect one end of the junction box lead to the junction box.
 The lead can go in either end of the junction box.
Figure 9
CAUTION!
Always use 2 wrenches to properly loosen and tighten the fittings mentioned in these procedures.
From the ignition console
2
3
1
1 Coolant supply hose (green)
2 Coolant return hose (red)
3 Pilot arc lead (yellow)