Hypertherm HT2000 Water Muffler - Manual (Page 24)

OPERATION & MAINTENANCE
HT2000/MAX200
Water Muffler
Instruction Manual
Page 3-5
Figure 3-2 Assemble/Disassemble the Nozzle Assembly
Disassemble the Nozzle Assembly
1. Insert the sleeve wrench (#034102) over the small diameter end of sleeve
(#034149) and turn to lock in place (see Figure 3-2).
2. Remove the sleeve from the body assembly (#034150) by turning the sleeve
wrench counterclockwise and pulling.
SLEEVE
WRENCH
#034102
SLEEVE
#034149
BODY
ASSEMBLY
#034150
O-RINGS
#044031
O-RINGS
#044135
5-95