Iec symbols used -4, Powermax, Iec symbols used – Hypertherm Powermax190c Operator Manual User Manual
Page 25
Advertising
SPECIFICATIONS
3
2-4
powermax
190c
Operator Manual
S MARK
The 230V Powermax190c system conforms to
standard EN50192. The S mark indicates that the
power supply and torch are suitable for use in environments with increased hazard of electrical shock.
The torch must have shielded consumable parts to maintain S mark compliance.
IEC Symbols Used
Direct current (DC).
Alternating current (AC).
Plasma cutting torch.
AC input power connection.
The terminal for the external protective (earthed) conductor.
An inverter-based power source.
Anode (+) work clamp.
Temperature switch.
Pressure switch.
Plasma torch in the TEST position (cooling and cutting gas exiting nozzle).
The power is on.
The power is off.
Volt/amp curve.
Advertising