Hypertherm HD1070 Product Configuration - Manual (Page 16)

1
ORDERING PROCEDURE
HD1070 Product Configuration Manual 2-5
Ordering Information
The figure below represents an HD1070 plasma cutting system mounted on a precision cutting machine. Use this
figure as a guide when configuring an HD1070 system. The system below is also represented in block diagram
form on page 2-14.
Each numbered step is cross-referenced in four areas: in the sample gantry system diagram below; in block
diagrams to clarify interfacing components; in the accompanying parts list; and in the specifications section to
clarify size and weight of major components. (Block diagrams are offered to clarify connection points and do not
necessarily reflect relative sizes or distances between components.)
Note: If the cutting system has a power track for cabling and hosing, be certain to see the Specifications section
to check hose, cable and connector diameters.
Figure 2-2 HD1070 System with a Precision Cutting Machine
1
1
1
10
12
11
5
8
3
9
4
6
2
7
A
Gas In
Power In
A
Gas In