Hypertherm HD1070 Product Configuration - Manual (Page 23)

1
ORDERING PROCEDURE
2-12 HD1070 Product Configuration Manual
Specify the Shielded Leads Between the RHF Console and the Torch
The shielded leads package between the remote high-frequency console and the torch consists of two
torch coolant leads and a pilot arc lead. This lead package is bound together by an external sheathing. If
the leads are being placed in a power track, then measure the length from the torch through the power
track to the console and allow an extra 3 to 5 feet of length. If a festoon system is used, measure the
width of the bridge and double it for lead length.
• Based on the distance between the torch and the remote high-frequency console and the above
considerations, specify the appropriate leads package.
Specify the Leads Between the Gas Console and the Torch
The leads package between the gas console and the torch consists of three hoses and a cable: a preflow
gas hose, a shield gas hose, a plasma gas hose and a control cable.
• Based on the distance (the path the leads will take) between the gas console and the torch, specify the
appropriate leads package.
Specify the Control Cable Between the Power Supply and the Cutting Machine
Interface
• Based on the distance (the path the cable will take) between the power supply and the machine computer
interface, order the appropriate cable.
Specify the Current Setpoint Cable Between the Power Supply and the Cutting
Machine Interface
• Based on the distance (the path the cable will take) between the power supply and the machine computer
interface, order the appropriate cable.
12
11
10
9