Hypertherm PAC500 Product Configuration - Manual (Page 41)

2-2 PAC-500
SYSTEM SPECIFICATIONS - Required Equipment
System Requirements
Power Requirements:
Refer to H-401 and H-601 power supply specifications below:
Gas Requirements:
Plasma Gas Types .......................................Nitrogen (N
2
)
Gas Quality .................................................. 99.995 pure (liquid gas recommended)
Nitrogen Gas Inlet Pressure ......................... 120 psi (8.3 bar)
Air Gas Inlet Pressure .................................. 120 psi (8.3 bar)
Water Requirements:
Water Flow ...................................................2.5 gpm (9.5 l/m)
Water Inlet Pressure ..................................... 35 psi (2.4 bar)
1 H-401 Power Supply
Dimensions and Weight
Width ............................................................ 27-1/4" (690 mm)
Height ...........................................................43" (1090 mm)
Depth ............................................................ 46" (1170 mm)
Weight ..........................................................1905 pounds (866 kg)
1 H-601 Power Supply
Dimensions and Weight:
Width ............................................................ 34" (860 mm)
Height ...........................................................43" (1090 mm)
Depth ............................................................ 46" (1170 mm)
Weight ..........................................................2260 pounds (1027 kg)
2 Control Console
Dimensions and Weight:
Width ............................................................ 13" (330 mm)
Height ...........................................................16" (410 mm)
Depth ............................................................ 15" (380 mm)
Weight ..........................................................75 pounds (34 kg)
Figure 2.1 Control Console Mounting Dimensions
12-3/8"
14-3/4"
16"
13-5/8"
12-3/4"
13-1/8"
11-1/2"
11-1/8"
12"
12-7/8"
5/16"
dia.(4)
9-93