Hyundai 2011 Tucson - Manual (Page 32)

Safety features of your vehicle
14 3
To fold down the rear seatback:
1. Press the rear seat belt buckles down
into the cushion, and inserts the rear
seat belt (except center seat belt) web-
bing in the guide to prevent the seat
belt from being damaged.
2. Use a key to release the rear center
seat belt from the center RH buckle.
3. Stow the center seat belt webbing in
the headliner, where the small tongue
will clip in the holder.
4. Set the front seatback to the upright
position and if necessary, slide the
front seat forward.
5. Lower the rear headrests to the lowest
position.
6. Pull on the seatback folding lever, then
fold the seat toward the front of the
vehicle. When you return the seatback
to its upright position, always be sure it
has locked into position by pushing on
the top of the seatback.
7. To use the rear seat, lift and pull the
seatback backward. Pull the seatback
firmly until it clicks into place. Make
sure the seatback is locked in place.
8. Return the rear seat belt to the proper
position, inserting the small tongue
into center RH buckle.
OLM039021 OLM039022