Hyundai 2008 Elantra User Manual

Page 182

Advertising
background image

4 109

Features of your vehicle

1. LOAD Button

This compact disc player will accommo-
date up to six compact discs.
To insert one disc into the player, do the
following:
1. Press and release the LOAD Button.
2. Blue light on the slot will be illuminated

and the lowest number of empty slot
will blink on the display. After "WAIT" is
displayed on the LCD, the slot will open
with "INSERT" displayed on the LCD.

3. Insert a disc partway into the slot, label

side up. The player will pull the disc in.
When the disc is inserted, the disc will
begin to play automatically.

NOTICE

• Playback of MP3, AAC, and WMA

file formats are supported. Load to

play time for these formats may be

longer due to the compressed nature

of these discs.

• The disc can be only inserted while the

green light is blinking on the slot.

• This CD player is suitable only for 12

cm discs, do not use irregular shaped

CDs.

To insert multiple discs into the player, do
the followings:
1. Press and hold the LOAD button for

one second or more. You will then hear
a beep sound and the green light on
the slot will be illuminated, and the
numbers of empty disc will blink on the
display.

2. After "WAIT" is displayed on the LCD

with the lowest number of empty slot
blinking, the slot will open with
"INSERT" displayed on the LCD.

3. Insert a disc partway into the slot, label

side up. The player will pull the disc in.
Once the disc is loaded, the numbers
of the empty disc will blink on the dis-
play continuously. If the next "DISC
NO." is displayed when the slot is illu-
minated, you can then load another
disc.

4. Load the remaining disc by following

the same procedures 1 and 2. When
you finished loading 6 discs, the CD
player will begin to play the last CD
loaded.

5. To load more than one disc but less

than six, complete Steps 1 and 2.
When you have finished loading discs,
press LOAD button to cancel the load-
ing function or wait for 10 seconds.
The CD player will begin to play the
last CD loaded. As each CD starts to
play, the DISC number will appear on
the display.

NOTICE

The disc player takes up to six discs.

Do not try to load more than six.

2. CD(AUDIO/MP3)/AUX Select

Button

• Press the CD Button to start CD play-

back, during radio operation or cas-
sette tape playing.

• When discs are in the CD deck, if you

press the CD button, the CD player will
begin playing even if the radio or cas-
sette player is being used.

• The CD player can be used when the

ignition switch is in either the "ON" or
"ACC" position.

• Push the CD button to start CD play-

back without pushing Power ON-OFF
control knob. (Only when a CD is in the
deck.

Advertising
This manual is related to the following products: