Hyundai 2008 Elantra - Manual (Page 187)

Features of your vehicle
114 4
1. Power Button and Volume
Control
• Used for turning on/off the audio sys-
tem.
• Press this button when using the audio
system to turn off the power.
• Turn the volume control clockwise to
increase volume and counterclock-
wise, to decrease. (The volume level is
displayed when adjusting the volume.)
2. Automatic Channel Seek
Button (SEEK)
Press this button to automatically find
and tune to next available channel.
(Press [
] to automatically seek next
available channel in higher frequencies
and [
] in lower frequencies.)
✽ ✽ NOTICE
If the channel is not received well, use
the manual control (4).
3. Preset Memory Button
Press this button and hold for less than
0.8 seconds to easily listen to the channel
memorized to the button. Also, when you
are listening to the channel other than the
channel memorized to the button using
TUNE or SEEK, press the button you
wish to memorize current channel to and
hold for more than 0.8 seconds until it
beeps to memorize the channel.
4. Manual Channel Select &
Sound Quality Control
• When listening to a radio channel,
rotate this control to manually adjust
the frequency. Turn this control to the
right to increase the frequency and left,
to decrease.
• This selects all functions related with
audio quality.
• When listening to the audio system,
press this button to select following
sound qualities in respective order.
- BASS
MIDDLE TREBLE
FADER BALANCE
EQUALIZER Current State
• Rotate the control to adjust the sound
mode when adjusting sound quality.
5. SCAN Button
Press this button to tune to all available
channels for 5 seconds each. (LCD will
display "SCAN") Press the button once
again to cancel scanning.
6. LCD (Liquid Crystal Display)
It displays the state of the system when
listening to the radio such as AM, FM1,
FM2, Stereo(ST), preset number, fre-
quency received, EQ mode (CLASSIC,
POP, ROCK, JAZZ) and SCAN status.
7. Radio Band (FM/AM) Selection
Button
• This selects FM/AM and the radio
band will change in the following order
every time you press the button.
- FM1 FM2 AM
• Press this button when CD or XM is on
to automatically change to radio mode.
• If the ignition switch of the automobile
is set to ACC (1st notch) or ON (2nd
notch), the system will be turned on
and automatically play the radio when
you press this button even if the power
of the audio system is off.