IBASE MI945 User Manual
Page 39
BIOS SETUP
MI945 User’s Manual
35
On-Chip VGA Setting
The fields under the On-Chip VGA Setting and their default settings are:
PEG/On Chip VGA Control: Auto
PEG Force X1: Disabled
On-Chip Frame Buffer Size: 32MB
DVMT Mode: DVMT
DVMT/FIXED memory Size: 128MB
Boot Display: CRT+LVDS
SDVO Device Setting: None
Remarks: Set to LVDS for ID390, Set to CRT for ID390C, Set to DVI for
ID391/ID392/ID391D/ID392D.
SDVO LVDS Protocol: 1CH SPWG, 18bit
SDVO Panel Number: 1024x768
Active LVDS Device: No LVDS
Panel Scaling: Auto
Panel Number:1024x768 18 bit SC
Note: SDVO Device Setting, SDVO LVDS Protocol, SDVO Panel
Number – for external device from connector CON1
Panel Scaling
The default setting is Auto. The options available include On and Off.
Panel Number
These fields allow you to select the LCD Panel type. The values for these
ports are:
640x480
18bit SC
800x480
18bit SC
800x600
18bit SC
1024x768
18bit SC
1280x1024
18bit DC
1280x768
18bit SC
1400x1050
18bit DC
1600x1200
18bit DC